How to Program a Chevy Key Fob

 
Buying a new Chevy vehicle at Spitzer Chevrolet St Marys is a seamless, all-encompassing experience! Before heading home to Johnsonburg in your new ride, we’ll make sure your Chevy key fob programming is taken care of. Still, you might want to know how to program a Chevy key fob on your own. It’s a question we hear quite often, so we’ve taken the time to put together the following guide! Read below to see how simple it is to program a Chevy remote start key fob. If you need a Chevy key fob replacement, we’ll cover that information below, too. 

Chevy Key Fob Programming: A Step-by-Step Guide

With the Chevy remote start key fob you would like to program in hand, follow these simple steps:

1. Manually unlock your car door with your Chevy key.
2. Ensure all car doors are fully shut, then insert the key into the ignition, but don’t start the car.
3. Press and hold the unlock button on the driver’s side door, then turn your key to the “On” position. The interior lights and radio will come on, but the engine should not be ignited.
4. Turn the key back to the “Off” position, then turn it to “On” and right back to “Off” once again in quick succession. (On – Off – On – Off) 
5. Release the unlock button.
6. After releasing the unlock button, you should hear the door locks engage and disengage, telling you that the Chevy key fob programming sequence can begin.
7. On your Chevy remote start key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. 
8. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.

Whether you have a Chevy Malibu key fob or a Chevy Silverado key fob, you can follow these simple steps to program it. If you have any questions along the way, don’t hesitate to give our service team a call at (814) 294-1325!

Where Can I Get a Chevy Key Fob Replacement?

If you lose your Chevy remote start key fob, Spitzer Chevrolet St Marys can help. The best place to get a Chevy key fob replacement is at a certified Chevrolet dealership, where you can be sure you’re getting a genuine Chevy key fob that will work with your vehicle just as seamlessly as the old one did. 

Need a new Chevy key fob battery? We can help with that, too! Reach out to our parts department to get started today, where our friendly Chevy parts specialists will ensure you get everything you need to get back on the road in Kersey.

Visit Us for Chevy Key Fob Assistance 

Do you still have questions about how to program a Chevy key fob? Contact us or schedule service at our dealership! Whether it’s a simple Chevy key fob battery issue or anything else, our team will do whatever it takes to help you return to a seamless driving experience in Ridgway.